SLICE-DCC Dual-Channel Current Source

SLICE-DCC Dual-Channel Current Controller low-noise current source with megahertz modulation bandwidth

Only %1 left
As low as $2,520.00

Features:

  • Two independent channels
  • Low noise
  • High modulation bandwidth
  • Automatically adjusting compliance voltage to 12 V
  • Touch screen control
  • Host GUI & API
  • Current limit
  • Interlock other devices based on temperature control fidelity

The SLICE-DCC is a compact, efficient cw current controller for driving diode, interband, and quantum cascade lasers as well as semiconductor optical amplifiers and tapered amplifiers. Part of the Vescent SLICE series of high-performance, economical photonic control electronics, SLICE-DCC offers two channels of low-noise current control. Proprietary self-adjusting power supply technology automatically sets the compliance voltage to as high as 12 V – but no higher than necessary to drive your load – allowing you to drive a traditional diode or a quantum cascade laser with the same device and the same efficiency. The two channels operate independently – including the automatic compliance voltage.

The SLICE-DCC includes all the features you expect from your current controller, including high modulation bandwidth, power leveling, interlocking, and current limiting & diode protection circuits. Not to mention ease of use through a touch screen, PC-based GUI, or an API command set. The unique switching power supply design accepts all standard AC mains voltages and is highly efficient but is also low noise without linear power technology.

Parameter

Value

Note

Number of Channels 2  
Operation Modes Constant Current or Constant Power  
Maximum Compliance Voltage 12 V  

Current Maximum

SLICE-DCC-200 200 mA  
SLICE-DCC-500 500 mA  
SLICE-DCC-1000 1,000 mA  
SLICE-DCC-2000 2,000 mA  

Current Noise

SLICE-DCC-200 1.5 µA rms, 100 Hz to 1 MHz
SLICE-DCC-500 4 µA
SLICE-DCC-1000 6.6 µA
SLICE-DCC-2000 12 µA

Current Resolution

SLICE-DCC-200 0.02 mA   
SLICE-DCC-500 0.04 mA  
SLICE-DCC-1000 0.05 mA  
SLICE-DCC-2000 0.1 mA  

Constant Current Mode

Modulation Bandwidth >1 MHz  
Current Accuracy <100 µA  
Drift <25 µA/°C  

Constant Power Mode

Power Fluctuations 0.1% Fluctuation of monitor photodiode current
Error Input ±5 mA Photodiode output
Transimpedance Amplifier Integrated  

Interface

Control Touch screen GUI and Serial API  
Serial Connection USB B  
Power Input 100-230 VAC, 50-60 Hz  

Physical

Dimensions 11.6 x 8.7 x 4.0" Two units will fit on a 19" rack tray